I’m Knitting as Fast as I Can!

I just love this new pattern on Ravelry that was published a few weeks ago. It is just fabulous!! It’s called The Joker and the Thief (by Melanie Berg), and it required 6 yarns that form a color gradient (this would be the Joker…) that is anchored by one color that is the Thief. I immediately went on the hunt for color gradients in my yarn stash, ended up making two trips to my favorite LYS, and moved yarns around and around until I finally settled on TWO color combinations for this shawl. Yeah! They are both fabulous and I have finally decided to make both of the shawls. Why do something if you can’t overdo it? See, this is a motto that all knitters can get behind. 🙂

Joker 1 Yarns
Here’s the yarn for the first Joker shawl (hereafter called Joker 1). The Thief will be the navy blue above the gradient. The Joker yarns (magenta and golds) are all Wonderland Yarns Cheshire Cat. The Navy is Madelinetosh Tosh Merino Light (Colorway Ink)
Joker and Thief Yarn
This is the yarn for the second Joker shawl (AKA Joker 2) The Joker is more Wonderland Yarns Cheshire Cat, and the Thief is the gold colored Knitted Wit Fingering Yarn.
MacKenzie and shawl yarn.
As usual my cat MacKenzie is chomping at the bit to get started on the shawls. He was a big help as I was winding the yarns, making the color keys, and kitting them up in plastic snap top (and moth proof!!) boxes.

I’m all ready to get started on the shawls except… I already have three projects going and one of them is on the needles that I need to use to knit the Joker. I thought about going to buy more needles. (No way! Who would do something like that???) I considered taking the shawl-in-progress off the needles so it could hibernate for a few weeks while I knitted the Jokers. Yeah, we all know what would have happened to that shawl.  It would have hibernated in a corner somewhere for a few years. Nope! I decided to suck it up and knit like the wind until it was done. This shawl is beautiful, and I will commit to finishing it in a timely manner! Feeling very self-righteous I began working on this shawl (Sidere by Hilary Smith Callis) again.

Marked up pattern.
Self-righteous can take you only so far. This pattern is requiring very close attention to the details which are all written out. I’m marking up the pattern like crazy while I work. This type of attention means that I can only knit when I have a big chunk of time open and sleeping cats.
Shawl
Still, I’m making good progress and the shawl is starting to look fantastic! I can’t wait to get this off the needles and blocked. Here’s the project notes on Ravelry if you would like more information.
Shawl
I’m also making this dark green 3S shawl as simple take-along knitting. The yarn is Becoming Art Fingering Yarn. I love the yarn but this shawl is going a little slowly too. 
Knitted Cat
I’m also working on a long-overdue knitted cat for one of my cousins. This one I knit on during news broadcasts. Here’s the pattern for the cats (it’s free!!!) on Ravelry.

So there we are. I’ve got two more projects all lined up and I’m dying to get started on them. I’ve been knitting as fast as I can for over a week, and I still haven’t gotten anything finished. The weather is warming up and I need to start tending to the lawn and gardens outside.

Stay tuned folks! I think that it may rain this weekend, and I’m hopeful to get at least one of these off the needles. 🙂

Jokers, here I come!!

 

Darwinian Mitts

 

knitted mitts
Soft squishy mitts that have a good fit, sport a stylish cable and can be machine washed. What more can you want?!

Materials

  • Approximately 100 yards of worsted weight yarn. The mitts look great in handpainted yarns that are smooth or a rustic one-ply. My favorite yarns are Malabrigo Rios, Madelinetosh Tosh Merino, or Dream in Color Calm.
  • Size 6 (4.0 mm) double pointed needles.
  • 2 stitch markers
  • 1 cable needle
  • Waste yarn
  • Yarn needle

Size
These mitts fit my small/medium sized hands well.

Gauge
This kind of depends on the yarn you use and how elastic the ribbing is.  Slightly stretched ribbing, 8 stitches = 2”

Abbreviations

  • CO: cast on
  • K: knit
  • C6B: slip three stitches onto a cable needle and hold to the back of the work. K3, K the three stitches from the cable needle.
  • C6F: slip three stitches onto a cable needle and hold to the front of the work. K3, K the three stitches from the cable needle.
  • PM: place marker
  • M1L: put strand between two stitches over left needle from front to back. Knit into back of the loop.
  • M1R: put strand between two stitches over left needle from back to front. Knit into the front of the loop.
  • SM: slip marker
  • BO: bind off

Thumb Gusset

  1. Round 1: PM, K1, M1R, K1, PM.
  2. Rounds 2-3: SM, K the stitches between the markers, SM.
  3. Round 4: SM, K1, M1R, K1, M1L, K1, SM. (There are now 5 stitches between the markers.)
  4. Rounds 5-6: SM, K the stitches between the markers, SM.
  5. Round 7: SM, K1, M1R, K3, M1L, K1, SM. (There are now 7 stitches between the markers.)
  6. Rounds 8-9: SM, K the stitches between the markers, SM.
  7. Round 10: SM, K1, M1R, K5, M1L, K1, SM. (There are now 9 stitches between the markers.)
  8. Rounds 11-12: SM, K the stitches between the markers, SM.
  9. Round 13: SM, K1, M1R, K7, M1L, K1, SM. (There are now 11 stitches between the markers.)
  10. Rounds 14-15: SM, K the stitches between the markers, SM.
  11. Next round: Place the 11 thumb stitches onto a piece of waste yarn using a needle while removing the markers. CO 2 stitches using backward loop method. K these two stitches in the following rounds of knitting.

Left Mitt

  1. Cast on 36 stitches. Divide the stitches evenly between the three needles (12-12-12) Join to knit in the round carefully, making sure to not twist the stitches.
  2. Rounds 1-4: Work in K2, P2 ribbing on all three needles.
  3. Round 5 – 8 : Begin cable pattern on 1st needle: K2, P2, K6, P2. Continue in K2, P2 ribbing on other 2 needles. Repeat for three more rounds.
  4. Round 9: Cable pattern on 1st needle: K2, P2, C6B, P2. Continue in K2, P2 ribbing on the other 2 needles. (Twist 1)
  5. Following 9 rounds: Needle 1: K2, P2, K6, P2. Continue in K2, P2 ribbing on other 2 needles. (The cable twists every 10th row of knitting.)
  6. Next round: K2, P2, C6B, P2 on 1st needle. Continue K2, P2 ribbing on 2nd needle. (K2, P2) twice, insert thumb gusset, P2 on 3rd needle. (Twist 2)
  7. Following 9 rounds: K2, P2, K6, P2. Continue in K2, P2 ribbing on other 2 needles working the thumb gusset at the same time on the 3rd needle.
  8. Next round: K2, P2, C6B, P2 on 1st needle. Continue K2, P2 ribbing on other needles while working the thumb gusset on 3rd needle. (Twist 3)
  9. Following 9 rows: K2, P2, K6, P2 on 1st needle. Continue K2, P2 ribbing on other needles while working the thumb gusset on 3rd needle. When the gusset is completed work K2 on the CO stitches to reestablish K2, P2 ribbing on this needle.
  10. Next round: K2, P2, C6B, P2 on 1st needle. Continue in K2, P2 ribbing on the other 2 needles. (Twist 4)
  11. Next 4 rounds: K2, P2, K6, P2. Continue in K2, P2 ribbing on other 2 needles.
  12. Next 3 rounds: K2, P2 ribbing on all three needles.
  13. Last round: CO loosely in pattern. As you cast off you create the 4th round of ribbing at the top of the mitt.

Right Mitt

Work exactly like the left mitt with these changes: 1. Replace each C6B with a C6F. This reverses the twist of the cable; it should be twisting towards the thumb. 2.  Work the thumb gusset on the 2nd needle in this way: K2, P2, insert thumb gusset, P2, K2, P2. The 3rd needle will be ribbing on this mitt.

 Finish Thumb

  1. Place the 11 stitches on the waste yarn back onto the needles and rejoin the yarn.
  2. Pick up and knit 4 stitches across the body of the mitt: 1 stitch before the 2 CO stitches, 2 in the CO stitches, and 1 after the CO stitches.
  3. Knit 5 rounds even.
  4. BO loosely.

You’re Done!
Each mitt has 4 ends that you will have to weave in. Do it!
What is blocking? Put on your mitts and go show them off!